Step 13 - Select the newly created Profile and choose Edit. Choose GNSS Rover > Add, to create a profile for the Zenith 25. Step 12 - After opening or starting a new project you will enter the Instrument Selection menu. FieldGenius 9.0 was used in this example. Step 11 - Select Use the following IP addresses and enter the IP address 192.168.253.1, and 255.255.255.0 under the Subnet mask. Step 10 - Select the Internet Protocol Version 4 (TCP/IPv4) then pick Properties. Step 8 - Under active networks choose Bluetooth Network Connection. Step 7 - Open the Windows Control Panel (Can be found from the Window Start Menu or searching in the Device and Printers window in the previous step). Step 6 - A small window should display Connection successful. Right click and choose Connect using > Ad hoc network. Step 5 - In the Devices and Printers window find the Zenth25 Bluetooth Device (matching the name in Step 2). You can also open this Window from the Control Panel Step 4 - In the Settings window choose Connected Devices from the options on the left, then pick Devices and Printers.

You will need the later when we connect using FieldGenius. It there are more than one Outgoing Ports pick the smallest of those listed. Switch to the COM Ports tab take note of the Outgoing COM Port number. Step 3 - Scroll to the bottom of the page and open More Bluetooth Options to open the Bluetooth Settings Menu. Step 2 - Select the Zenith25 from the Bluetooth Devices list and choose Pair. Step 1 - Right click on the Windows Bluetooth Icon in the Task Tray. If the SIM card is installed into the GNSS reciever this method is not required. Note, this only applies if data collector internet (SIM card in the data collector) is being used to receive the corrections from the corrections service. This guide explains how to establish a PAN connection using Windows 10 and FieldGenius 9.0.20.3 installed on a Getac tablet. Posted by James Thomas on 09 February 2022 11:13 AMĪ PAN (Personal Area Network) connection is used when connecting connecting the tablet version FieldGenius to a Geomax Zenith 25 Pro (or Zenith 15) GNSS.

Geomax assistant zenith 25